Share |

Content about Risk

March 25, 2013

PATERSON, N.J. — Brite Services Inc., dba Star Laundry, faces 39 serious safety and health violations: OSHA

PATERSON, N.J. — The U.S. Department of Labor’s Occupational Safety and Health Administration (OSHA) has cited Brite Services Inc., doing business as Star Laundry, for 39 serious safety and health violations found at its commercial laundry facility in Paterson, the agency reports.

Inspectors were prompted by a complaint alleging the company would not allow workers to leave the building during an emergency. Proposed penalties total $164,700.

OSHA found electrical hazards and an obstructed and improperly marked exit route, the agency says. Some of the alleged violations include:

  • Allowing employees to potentially be struck by traffic while transporting laundry bins from one building to another while crossing a public street.
  • Failing to provide a cover and guardrails for open pits, and a handrail for the stairway.
  • Failing to evaluate the workplace for permit-required confined spaces, to post signs informing workers of confined spaces, and to develop a written confined-space permit program.
  • Failing to establish an energy control program for performing maintenance/servicing work.
  • Failing to train power industrial truck operators, and to take powered industrial trucks in need of repair out of service
  • Failing to insulate or cover steam pipes less than 7 feet from the floor
  • Failing to properly guard machines, implement a hearing conservation program for workers exposed to noise levels at 88-89 decibels, ensure safety goggle usage, provide an unblocked eyewash station, develop a written hazard communication program, and provide hazard communication training.

“The vast number and range of safety and health hazards observed by OSHA at this facility indicates the lack of a functioning safety and health management system,” says Lisa Levy, director of OSHA’s area office in Hasbrouck Heights, N.J. “Each employer is responsible for ensuring a safe and healthful work environment, which Brite Services did not do. This company has the opportunity now to educate itself, correct these hazards and protect its workers.”

Brite Services has 15 business days from receipt of the citations to comply, request an informal conference with OSHA, or contest the citations and proposed penalties before the independent Occupational Safety and Health Review Commission.

The citations can be viewed here.

January 24, 2013

CHICAGO — Across-the-board reductions in injury and illness rates, survey indicates

CHICAGO — For Toledo’s NuCentury Textile Services, 2012 began under horrible circumstances.

Published reports indicate that, on Jan. 3 last year, an employee failed to turn off and lock a folder before servicing it. His clothes got caught in the machine, and his hand and forearm were injured. He later died from complications while recovering at home.

The Occupational Safety & Health Administration (OSHA) cited NuCentury for several alleged safety violations and fined it $40,000. NuCentury hired a safety consultant and took other steps to improve its safety program, prompting OSHA to lower the fine to $19,600.

Despite best efforts, on-the-job accidents do occur in and around textile service facilities, and employees are injured or, on rare occasions, even killed.

There are resources available to  help an operator ensure his plant is being run safely, and among them is SafeTRSA, a program offered by the Textile Rental Services Association (TRSA).

It provides safety training materials to TRSA members and measures the industry’s progress in implementing enhanced practices to reduce and eliminate occupational injuries and illnesses in plants and depots, according to Ken Koepper, director of marketing and public relations for the association.

Success is quantified when TRSA administers its annual survey of its members’ occupational injury and illness data, he explains. “Such tracking over the past several years has prompted TRSA’s creation of industry-specific initiatives and resources to focus on the industry’s highest risk areas and those cited most frequently by OSHA.”

This has resulted in TRSA members’ adoption of proven policies and procedures for maintaining equipment (lockout/tagout), handling soiled linen (especially bloodborne pathogens) and working in confined spaces, Koepper says.

“The networking and information-sharing between members on such matters has generated new programming for educational institutes and conferences as well as publications, online resources, videos and more.”

Membership-wide safety statistics enable TRSA companies to easily compare their improvements to the industry norm and foster further gains.

Data from 2011, reported in 2012, will be released by TRSA shortly.

“Our survey from 2010 covered 59 textile services companies operating 720 processing facilities and depots,” Koepper says. “It showed that in the prior four years, the industry experienced across-the-board reductions in its injury and illness rates. TRSA calculates separate TRIR and DART rates for plants and depots.

“The new report will reflect further reductions. Also, participation in the survey increased in 2012, to 66 companies operating 792 facilities.”

TRIR stands for Total Recordable Incidence Rate. DART is short for Day Aways, Restricted or Transferred.

From 2006 to 2010, TRSA respondents reduced their total number of recordable injuries and illnesses per 100 employees (TRIR Rate) from 9.5 to 5.5, Koepper says. Injuries and illnesses per 100 employees resulting in days away from work, job restrictions and/or job transfers (DART Rate) dropped from 5.8 to 3.9.

TRSA also calculates separate figures for the industrial and linen segments. The new report will cross-reference these with the federal Bureau of Labor Statistics’ (BLS) industry-wide figures, according to Koepper.

In 2011, at TRSA’s request, for the first time in roughly a decade, BLS published separate TRIR and DART rates for textile services (industrial and linen) as opposed to the agency’s prior practice of only consolidating them with all other types of commercial laundry (mostly dry cleaning and coin laundry).

Koepper says TRSA requested this reporting enhancement as a means for tracking future industry-wide improvements.

“Although TRSA and BLS results show that the industry is still short of achieving its ultimate objective—eliminating occupational injuries and illnesses in its facilities—these reports also demonstrate dramatic progress towards achieving that goal,” he says.

TRSA hosted a Safety Summit last year that focused on enhancing safety cultures across the industry.

“It had been four years since the industry conducted a single-subject meeting on safety,” Koepper says. “Although it was a seminar topic in conferences and educational institutes, too much time had passed since an event dedicated to the subject was held.”

Audiences for prior safety-focused meetings had consisted mostly of hands-on safety professionals. The Summit concept involved the highest levels of textile services management, elevating TRSA’s involvement in guiding operators in increasing the prominence of safety in their corporate cultures.

“The Summit went beyond day-to-day injury prevention tactics,” Koepper says. “It examined options the industry could exercise collectively to hire the proper expertise, immediately assess the greatest risks and devise near-term action plans for developing standards and communicating them to operators.”

The TRSA Safety Committee is working on those plans, and a second Safety Summit has been scheduled for May 22 in Indianapolis.

Koepper says he’s seen the industry make great strides in automation in recent decades.

Automated material handling reduces the “manual labor requirement for this purpose. Soil bags are hoisted and carried on rails automatically to washers. Computing drives clean-side garment sorting. To prevent hazardous discharge of energy, smart systems are limiting access to areas where electricity must be controlled to ensure machines don’t start unexpectedly.”

But automation isn’t likely to ever completely eliminate all the different types of human movement required to provide textile services.

“Route service, for example, will always involve an individual walking from a truck to a customer’s receiving area,” Koepper says. “To reduce exposure, the industry has increased its proficiency in safer lifting, carrying and pushing. More individuals are cross-trained to perform different jobs in the course of a day to curtail redundant motion.”

TRSA is guiding members in their quest to convince every employee that safety comes first and productivity second.

While it is still a huge job to get to zero incidents in an industry so heavily dependent on athleticism and individual workers’ judgment, Koepper says TRSA is pleased with the gains of recent years and believes more improvement lies ahead.  

October 10, 2012

WILMINGTON, Mass. — Scraper mats, carpet-topped walk-off mats combine to lessen slips, trips, falls

WILMINGTON, Mass. — Working in a nursing home or residential care facility can be particularly hazardous to your health, according to the Occupational Safety and Health Administration. OSHA says such employees miss work at a rate that is 2.3 times higher than all other private industry businesses combined, largely related to accidental slips, trips and falls.

OSHA has targeted these healthcare facilities in a national emphasis program (NEP), meaning it will now be inspecting such businesses, specifically, for safety violations over the next three years. And it will be keeping tabs on all types of businesses for slips, trips and falls because data shows such accidents cause 15% of all accidental deaths in North America—second only to car accidents.

“Since dirty and wet walking surfaces are often cited as causes of preventable accidents, safety-minded businesses often include commercial 'floor mat systems' to help prevent slips and falls,” says Adam Soreff, director of marketing for UniFirst, a company that provides commercial floor mat and uniform services.

The most effective floor mat systems, according to Soreff, consist of placing scraper mats with raised rubber cleats outside entranceways to remove heavy dirt and moisture first, and then placing carpet-topped walk-off mats inside entrances to trap any residual dirt and moisture. Placing walk-off mats in all heavy traffic areas inside helps contain soiling and moisture even further.

And there are special mats available, such as “wet area” mats that funnel spilled liquids beneath their surfaces (recommended near areas such as sinks and drinking fountains) and anti-fatigue mats that can reduce muscle and joint fatigue (helpful wherever employees stand for long periods of time).

It's imperative that businesses look for industrial-grade mats specifically constructed to lie flat and stay put, Soreff adds. UniFirst recommends mats certified as “high traction” by the National Floor Safety Institute (NFSI).

Even the highest quality floor mats must be professionally cleaned, maintained and inspected on a regular basis to remain clean and fully functional. “Vacuuming alone won't do it, and neither will a scrub brush,” Soreff says. “You've got to get deep down into rubber crevices and fiber pilings to hygienically clean floor mats.”

It's surprising that many facility managers are unaware that there are companies like UniFirst that can bundle commercial floor mat systems with other business services, he adds.

May 3, 2010

CHICAGO — The perception of playing favorites at any level in an organization, whether true or not, must be avoided at all times. Such a perception can have a negative impact on the work force.

An AmericanLaundryNews.com Exclusive

July 11, 2008

One of the hardest things for a manager to do is manage risk — the kind that comes with adding a new service or customer or promising to cut labor expenses if new equipment is purchased.

Managing risk properly is an essential part of what makes a manager above average or excellent. The fear of risk often holds a manager back or prevents him or her from adequately preparing for the future.

June 18, 2008

CHICAGO — Textile service companies and managers are under increasing pressure to provide greater levels of quality, while reducing environmental impact and energy consumption.